FT PVC Insulated Cable - 4.0mm

Usage Guidelines: PVC insulated cable of Malaysia, which is distributed by a local company named FT Electronics Sdn Bhd, are commonly used in various electrical applications due to their durability, flexibility, and insulation properties. When working with a 4.0 mm PVC cable Malaysia, there are a few important steps to consider for proper usage.

Firstly, ensure that the cable is suitable for the intended purpose. PVC insulated cables are available in different types, such as single-core or multi-core cables, and they have varying voltage and current ratings. Verify that the 4.0 mm cable you have is appropriate for your specific application and meets the required standards and regulations in Malaysia.

Before installation, inspect the cable for any visible damage or defects. Check for any cuts, abrasions, or exposed wires that may compromise the integrity of the insulation. It's crucial to use a cable in good condition to prevent electrical hazards and ensure reliable performance.

Next, prepare the cable ends for connection. Strip off a sufficient length of the PVC insulation at each end, usually around 15-20 mm, using a wire stripper or a sharp knife. Take care not to damage the conductor while removing the insulation.

Once the cable ends are prepared, you can connect them to the desired electrical components or terminals. The specific method of connection will depend on the application. Common techniques include using screw terminals, crimping connectors, or soldering the wires. Consult the manufacturer's guidelines or seek assistance from a professional if you are unsure about the correct connection method.

During the installation process, avoid excessive bending, twisting, or stretching of the cable, as this can strain the insulation and potentially cause damage. Secure the cable along its route using appropriate clamps or fasteners to prevent undue stress and maintain a neat and organised installation.

Finally, after the cable is properly connected and secured, perform a thorough insulation resistance test to ensure its integrity. This test measures the resistance between the conductor and the PVC insulation, helping identify any insulation faults or breakdowns. If the insulation resistance is within acceptable limits, you can proceed with the electrical system's operation.

Remember to adhere to all safety precautions while working with PVC insulated cables. Wear appropriate personal protective equipment, such as insulated gloves and goggles, and follow electrical safety guidelines to minimise the risk of electric shock or other accidents.

In summary, using a 4.0 mm PVC insulated cable in Malaysia involves selecting the appropriate cable type, inspecting for damage, preparing the cable ends, making proper connections, securing the cable, conducting insulation resistance testing, and ensuring compliance with safety measures. By following these steps, you can effectively utilise PVC insulated cables for your electrical applications in Malaysia

1. 100% Pure Copper: When utilising a PVC insulated cable of Malaysia with a cable size of 4.0 mm that is made of 100% copper, it is important to consider the benefits and characteristics of this specific type of cable. Firstly, copper is known for its superior electrical conductivity, making it an ideal choice for transmitting electricity efficiently. The 100% copper conductor within the cable ensures maximum conductivity, minimising power loss and promoting optimal performance in electrical applications.

Certification/Claims: 

1. Sirim QAS International:PC002162:  A PVC insulated cableMalaysia with the Sirim QAS International certification code PC002162 indicates that it has been tested and approved by a recognized certification body. This certification ensures that the cable meets quality and safety standards set by Sirim QAS International. It provides assurance that the cable has been evaluated for electrical performance, insulation integrity, and compliance with industry regulations. Using a certified cable gives confidence in its reliability and adherence to established standards for safe electrical applications in Malaysia.

Storage Instruction:  Proper storage of a 4.0 mm PVC insulated cable that is Malaysia-made is crucial to maintain its quality and integrity over time. Here are some guidelines to consider when storing this type of cable:

Firstly, choose a suitable storage location that is dry, cool, and free from direct sunlight. Exposure to excessive heat and sunlight can degrade the PVC insulation and affect the cable's overall performance. A dry environment helps prevent moisture absorption, which could lead to insulation damage or corrosion of the copper conductor.

Ensure that the storage area is well-ventilated to prevent the buildup of humidity and condensation. Excessive moisture can accelerate the deterioration of the cable and contribute to the growth of mould or mildew, which can compromise its electrical properties.

To prevent physical damage, store the cable in a clean and organised manner. Avoid stacking heavy objects on top of the cable, as this can cause deformation or crushing. If storing multiple cables, consider using appropriate cable racks or reels to maintain their shape and prevent tangling.

Coiling the cable properly is essential to avoid kinks, twists, or bends that could damage the insulation or conductor. Start by loosely coiling the cable, ensuring that the loops are not too tight. It is best to use a cable reel or drum for larger lengths of cable, as this provides better support and prevents unnecessary strain.

Label the cable or keep a record of its specifications, such as the size, length, and any relevant information. This makes it easier to identify and retrieve the desired cable when needed, without having to uncoil or disrupt other cables in storage.

Regularly inspect the stored cable for any signs of damage, such as cuts, abrasions, or exposed wires. If any issues are identified, repair or replace the cable as necessary before using it in any electrical applications.

By following these storage guidelines, you can maintain the quality and performance of your 4.0 mm PVC insulated cable that is Malaysia-made. Proper storage helps ensure its longevity, reliability, and safe usage when required.

Packaging Information: 

Overview of PVC Insulated Cable Malaysia

The PVC insulated cable available in Malaysia is a highly versatile and reliable electrical cable that is widely used in various applications across different sectors. This cable is designed to meet the demanding requirements of electrical systems, offering a range of features and specifications to ensure optimal performance and safety.

One notable characteristic of this PVC insulated cable is its material composition. It is made of 100% full copper, which is chosen for its exceptional electrical conductivity. Copper is renowned for its low resistance to the flow of electricity, enabling efficient transmission of power and minimising energy loss. This makes the cable ideal for applications that demand high conductivity and reliable electrical performance.

The cable size, specified as 1C x 4.0 mm, indicates that it is a single-core cable with a cross-sectional area of 4.0 mm². The cable's size plays a crucial role in determining its current-carrying capacity and suitability for specific applications. The 4.0 mm² size ensures that the cable can safely handle the electrical load and voltage requirements of a wide range of installations, making it a versatile choice for both residential and commercial projects.

With a voltage rating of 450/750V, this PVC insulated cable is designed to operate within electrical systems with a maximum voltage of 450 volts for DC and 750 volts for AC. This voltage rating allows for reliable and safe performance in various electrical installations, ensuring the cable can withstand the voltage stress without compromising its integrity.

The cable is conveniently available in a length of 100 metres, providing ample cable for most installation scenarios. This length allows for flexibility in routing and connecting electrical components, ensuring that the cable can reach the desired destinations without the need for additional splicing or extensions.

Manufactured in Malaysia, this PVC insulated cable adheres to the country's stringent quality standards and regulations for electrical cables. The manufacturing process ensures that the cable meets the necessary specifications and undergoes rigorous testing to ensure reliability and safety.

Overall, the PVC insulated cable available in Malaysia is a robust and versatile solution for electrical installations. With its 100% full copper composition, suitable cable size, voltage rating, and convenient length, this cable provides efficient power transmission, flexibility, and compliance with safety standards. Whether it's for residential, commercial, or industrial applications, this PVC insulated cable is designed to meet the diverse electrical needs of projects in Malaysia.

PVC Insulated Cable Malaysia Specifications

- Conductor Material: 100% Full Copper
- Insulation: Polyvinyl Chloride (PVC)
- Voltage Rating: 450/750V
- Cable Sizes: 4.0 mm
- Number of Cores: single core (1C) 
- Colour Coding: red, yellow, and blue for active conductors (line), black for neutral, and green/yellow for the protective earth conductor.
- Compliance: Sirim QAS International:PC002162