Spark Enhancer for Toyota with 4 Direct Coils Harness

Usage Instruction: Attention workshops and businesses with company vehicles! Are you looking to supercharge your operations and maximise the potential of your car? Look no further than the JCraft Spark Enhancer! Our revolutionary ignition booster product is designed to deliver unparalleled performance, fuel efficiency, and reliability to workshops and businesses like yours. Instructions for using a spark enhancer, in general, are as follows:

1. Preparation: Ensure your car's ignition system is turned off and the engine is cool before installing the spark enhancer.
2. Locate the Ignition Coil: Identify your vehicle's ignition coil, and consider installing the spark enhancer. The number of ignition coils may vary depending on the engine configuration. Typically, they are located near the engine block or on top of the engine.
3. Disconnect the Battery: Before working on the ignition system or installing the spark enhancer, it is essential to disconnect the negative terminal of the vehicle's battery to prevent any electrical accidents.
4. Access the Ignition Coil: Remove any necessary components or covers to access the ignition coil, and carefully detach any screws, clips, or connectors. This step is essential before installing the spark enhancer.
5. Connect the Spark Enhancer: Locate the primary or signal wire that connects the ignition coil to the distributor or electronic control module (ECM). This wire carries the frequency for spark generation. Cut this wire, leaving enough length on both ends for connection.
6. Install the Spark Enhancer: Connect one end of the spark enhancer to the wire from the ignition coil and the other to the wire going to the distributor or ECM. Follow the manufacturer's instructions and secure the connections using appropriate connectors or electrical tape.
7. Double-Check the Connections: Ensure all connections are secure and properly insulated. Check whether the wiring is broken or any connecting components are loose.
8. Reconnect the Battery: Once the spark enhancer is installed and all connections are secure, reconnect the negative terminal of the vehicle's battery.
9. Test and Fine-tune: Start the engine and test the spark enhancer. Observe any changes in engine performance, such as improved ignition, smoother operation, or enhanced power delivery. Consult the spark enhancer's manual for fine-tuning options or adjustments if necessary.

These are just guidelines, and the actual process of installing the spark enhancer may differ based on the specifics of your vehicle's make and model. Contact JCraft's customer care if you encounter any problems, or hire our trained technicians to set everything up for you. 

Mentioning(s): JCraft Motorsport Empire's unique skills and expertise have ensured their success in the competitive automobile business. They have also adopted innovative technologies such as the spark enhancer, further strengthening their reputation and position as industry leaders.

1. 11+ Years Of Experience:  JCraft Motorsport Empire has a successful track record of 11 years or more, dedicated to research and development. Their primary focus is to provide customers with the finest driving experience in comfort and power. They incorporate cutting-edge technologies, such as the spark enhancer, into their bespoke enhancements, compatible with many vehicles, including popular brands such as Lotus, Audi, Volkswagen, Mazda, Toyota, Lexus, and Subaru.
   
   
2. Professional Experts:  At JCraft Motorsport Empire, all our technicians undergo rigorous training to ensure exceptional expertise and customer satisfaction. We invest in their continuous development to stay updated with the latest automotive advancements, including integrating innovative technologies like the spark enhancer. 

Easy Installation: JCraft Motorsport Empire understand that your business cannot afford complicated and time-consuming installation processes. That's why the spark enhancer is designed for hassle-free integration. Our experts, equipped with extensive knowledge and experience, will provide thorough support and guidance throughout the installation process of the spark enhancer and other enhancements. Their goal is to ensure a smooth installation of ignition booster for your entire vehicle while minimising interruptions to your operations.

Spark Enhancer Instant Results: Our cutting-edge spark enhancer is engineered to deliver instant results, giving you the power to dominate the road like never before. Here's why the JCraft’s spark mini booster is the ultimate game-changer:

1. Higher Drivable Mileage: The JCraft Motorsport Empire, along with the spark booster, offers the advantage of higher drivable mileage, enabling you to explore longer distances without requiring frequent refuelling. The spark enhancer optimizes ignition efficiency, giving you the confidence and ease to embark on extended journeys.
   
   
2. Exhilarating Performance: JCraft Motorsport Empire, in conjunction with the spark enhancer and its advanced technology, unlocks the full potential of your vehicle. Experience explosive acceleration, exhilarating overtakes, and a driving experience that truly sets you apart from the crowd. Our commitment to pushing boundaries ensures a remarkable driving journey that exceeds expectations.
   
   
3. Smoother Acceleration: The JCraft Motorsport Empire, with the added spark enhancer, takes throttle response to new heights. Experience a seamless and immediate power surge, making it effortless to merge onto highways, conquer uphill challenges, and revel in a dynamic driving experience. Our enhancements ensure that every moment behind the wheel is filled with excitement and confidence.
   
   
4. Minimised Unburnt Fuel: Drive smarter and reduce wasted fuel with the JCraft Motorsport Empire. Our spark enhancer optimizes combustion, minimizing unburnt fuel and maximizing efficiency. Take a greener approach to driving while enjoying the benefits of reduced fuel costs and a reduced environmental impact.
   
   
5. Consistent Ignition: The JCraft Motorsport Empire's spark enhancer ensures consistent and reliable ignition, eliminating misfires and ensuring smooth engine operation. Whether starting up or pushing it to its limits, it guarantees a dependable ignition system.
   
   
6. Unmatched Propulsion: The JCraft Motorsport Empire’s spark enhancer offers unparalleled power and propulsion, with advanced technology delivering acceleration and torque. Experience the thrill of effortless performance as you conquer challenging terrains and push the speed limits.

Unwavering Durability: JCraft Motorsport Empire know that your business demands enhance ignition spark products that can withstand the rigours of daily use. The JCraft spark enhancer is built to last, with top-quality components and a robust design. Rest assured, our spark booster is engineered to withstand the toughest conditions, ensuring long-term reliability and minimal maintenance requirements.

Risk-Free Investment: We stand behind the quality of our spark enhancer product. The spark booster has a comprehensive warranty, ensuring your satisfaction and peace of mind. If you encounter any issues, our dedicated customer support team will assist you promptly.

Packaging Information: The spark enhancer packaging is durable, sealable, and labelled with essential information such as usage instructions and safety warnings. The packing also includes a batch number for tracking purposes. Consider keeping the spark booster product in its original packaging for optimal protection.

Storage Instruction(s): To store the spark enhancer product:

1. Keep spark enhancer in a cool, dry place away from direct sunlight and extreme temperatures (ranging from 10°C (50°F ) to 25°C (77°F )).
2. Avoid moisture or humidity. 
3. Store the spark booster in its original packaging or an airtight container.
4. Separate it from chemicals, solvents, and strong odours.
5. Ensure the ignition booster is easily accessible and labelled.

Spark Enhancer Overview

Spark enhancer is a cutting-edge ignition enhancer engineered to increase engine power by enhancing ignition spark. Its plug-and-play harness offers effortless installation for specified car models like Toyota.

Designed by JCraft, this mini performance enhancer has garnered positive reviews for its vital spark and remarkable results. By optimizing the ignition spark, the spark booster improves throttle response and delivers a potent boost in engine power.

With its compatibility with spark plugs, ignition coil boosters, and other car electronic systems, the spark enhancer acts as a strong booster, optimizing your accelerator pedal and throttle controller for a thrilling driving experience.

Experience the power upgrade with the spark enhancer's voltage booster and plasma ignition system, providing high-voltage sparks and a firestorm ignition. Say goodbye to wasted sparks and embrace the efficiency of multi-frequency ignition.

Spark enhancer is more than just a power booster. It also offers fuel-saving benefits by optimizing fuel combustion. The ignition booster ensures reliable performance and voltage regulation and is compatible with various cars, including Toyota models.

Spark Enhancer Specification

- Spark enhancer improves fuel efficiency, resulting in higher mileage.
- Spark enhancer boosts engine power, delivering exhilarating performance.
- Power delivery and acceleration improved, eliminating jerky starts with spark booster.
- Spark enhancer improves fuel efficiency by optimizing ignition spark.
- Spark booster ensures reliable ignition, reducing misfires and maintaining engine stability.
- Ignition booster increases engine power and propulsion.

Spark enhancer's three voltage specs:

- Spec Y 14/14.4v (mild effect or can be used for the fuel pump).
- Spec G 14.8/15.3v (commonly used for daily or general car).
- Spec B 15.8/16.8v (cooling system upgrade and colder heat range spark plugs required)